线阵CCD指向角解算方法的模拟实验研究     

岳庆兴  邱振戈  贾永红  张春玲 《测绘科学》2010,35(3):15-17

本文根据卫星线阵CCD指向角的特点提出简化解算模型,用单位四元数来描述旋转角,以几乎无偏估计作为平差方法。通过一系列模拟实验证实在外方位元素初值比较准确的前提下可以以较高精度求得设计的参数。模拟了不同的姿态稳定度、控制点精度、控制点密度、岭参数及航线长度对解算结果的影响。  相似文献   

Understanding and modeling basin hydrology: interpreting the hydrogeological signature     

R. E. Beighley  T. Dunne  J. M. Melack 《水文研究》2005,19(7):1333-1353

Basin landscapes possess an identifiable spatial structure, fashioned by climate, geology and land use, that affects their hydrologic response. This structure defines a basin's hydrogeological signature and corresponding patterns of runoff and stream chemistry. Interpreting this signature expresses a fundamental understanding of basin hydrology in terms of the dominant hydrologic components: surface, interflow and groundwater runoff. Using spatial analysis techniques, spatially distributed watershed characteristics and measurements of rainfall and runoff, we present an approach for modelling basin hydrology that integrates hydrogeological interpretation and hydrologic response unit concepts, applicable to both new and existing rainfall‐runoff models. The benefits of our modelling approach are a clearly defined distribution of dominant runoff form and behaviour, which is useful for interpreting functions of runoff in the recruitment and transport of sediment and other contaminants, and limited over‐parameterization. Our methods are illustrated in a case study focused on four watersheds (24 to 50 km²) draining the southern coast of California for the period October 1988 though to September 2002. Based on our hydrogeological interpretation, we present a new rainfall‐runoff model developed to simulate both surface and subsurface runoff, where surface runoff is from either urban or rural surfaces and subsurface runoff is either interflow from steep shallow soils or groundwater from bedrock and coarse‐textured fan deposits. Our assertions and model results are supported using streamflow data from seven US Geological Survey stream gauges and measured stream silica concentrations from two Santa Barbara Channel–Long Term Ecological Research Project sampling sites. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

村镇规划国土GIS数据的组织方法研究     

崔秉良  许礼林  曹凯滨 《测绘软科学研究》2010,(3):6-10

村镇规划国土GIS数据是村镇规划国土信息系统的数据基础,因为其涉及规划、国土、建设等多个行业,数据来源多样、结构复杂,因此不能简单地照搬城市领域的相关建设经验,而需对其数据组织方法进行深入的研究。本文首先分析了村镇规划国土GIS数据的特点,然后从数据分类编码、数据集成、异构数据融合和数据的专题化管理等几个方面对其进行了探讨研究。其对我国新农村建设中村镇信息的规范化组织有一定的借鉴作用。  相似文献   

2019年7月3日辽宁开原伴随EF4级强龙卷的超级单体风暴分析     

耿世波  才奎志  王瀛  周福然  肖光梁  黄海亮  柴晓玲 《气象与环境学报》2022,38(3):1-10

综合利用多普勒雷达、地面自动气象站以及风廓线等观测资料和ERA5再分析资料,对2019年7月3日发生于辽宁开原的超级单体风暴伴随EF4级强龙卷环境条件、多普勒雷达回波特征和形成机理进行详细分析。结果表明:本次过程发生于低层暖湿高层冷干强的热力不稳定环境条件下,在地面干线汇合流场形成地面辐合线附近触发湿对流并发展为伴有龙卷的超级单体风暴。龙卷发生于低层钩状回波附近,多普勒雷达上呈现经典超级单体风暴雷达回波特征,低层强的垂直风切变将水平涡度转化为对流风暴中垂直涡度,强上升运动使得顺流涡度倾斜拉伸,从而龙卷发生前17 min在多普勒雷达2.4°仰角首先出现中气旋结构,随后风暴向南移动过程中,风暴的后侧下沉气流(RFD)将中低层的涡度“压低”致使龙卷接地,因此龙卷发生后1 min在0.5°仰角也出现强中气旋并有类龙卷涡旋特征(TVS),中气旋最强时的旋转速度达到28 m·s^(-1)(强中气旋标准),因此本次龙卷符合“自上而下”I型龙卷特征。由于环境干燥空气夹卷造成水滴强烈蒸发和冷却,使得地面出现了1 h降温达10℃的强冷池,过强的冷池可能在促使龙卷消亡过程中起到关键作用,致使龙卷持续了约30 min后消亡。  相似文献   

模型沙干重度的变化规律及其在泥沙模型试验中的作用     

韩玉芳  陈志昌 《海岸工程》2003,22(1):1-7

模型沙干重度在动床模型试验中是影响起动流速比尺和冲淤时间比尺的重要参数，其随淤积历时、粒径变化、埋置深浅和加工方法的不同有着不同的变化规律。通过试验，结合已有的成果，对模型沙干重度受以上几种因素的影响进行了研究，并进一步分析了其变化规律在动床模型试验中的作用。  相似文献   

Distribution of population-based indicators across multiple taxa to assess the status of Gulf of Alaska and Bering Sea groundfish communities     

Mueter  Franz J.; Megrey  Bernard A. 《ICES Journal of Marine Science》2005,62(3):344-352

  相似文献   

Ultimate strength of ship hulls under torsion     

Jeom Kee Paik  Anil K. Thayamballi  P. Terndrup Pedersen  Young Il Park 《Ocean Engineering》2001,28(8):51

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.  相似文献   

Standard facies models to incorporate all heterogeneity levels in a reservoir model     

D. Mikes  C.R. Geel 《Marine and Petroleum Geology》2006,23(9-10):943-959

The construction of reservoir models is frustrated by the fact that core and well cover only a fraction of the reservoir volume and it is therefore difficult to determine features like facies shape, -size, and -distribution, inter- and intra-facies boundaries and lateral trends from them. These features are, however, critical to fluid flow and they should necessarily be incorporated in the reservoir model and we therefore propose to systematically describe geometry and distribution of facies. To this end we make use of “standard facies models” that a priori contain all elements and boundaries of facies for a number of typical depositional environments.  相似文献   

Catch per unit effort, foraging efficiency, and parental investment in breeding great cormorants (Phalacrocorax carbo carbo)     

Gremillet  David 《ICES Journal of Marine Science》1997,54(4):635-644

  相似文献   

空间刚架结构极限强度分析     

刘修禾 《海洋工程》1997,(3)

本文用理想结构单元法对空间刚架结构进行了极限强度分析，理想结构单元法在于将结构分成最大可能的单元。以简单的形式归并几何非线性与材料非线性。按增量形式加载，直到达到极限强度。本文根据Ｒａｓｈｅｄ理论导出了对称的切向方程组，节省了存贮单元、改善了破坏准则的描述。算例结果与非线性有限单元法结果十分吻合。  相似文献